sterile-ultrasound-probe-covers-sonoguardplus-2
sterile-ultrasound-probe-covers-sonoguardplus-2
sterile-ultrasound-probe-covers-sonoguardplus-1
sterile-ultrasound-probe-covers-sonoguardplus-3

Sterile ultrasound probe covers with cohesive sound conductive surface

Request product

 

Saves time and consumables through an unrestricted ultrasound image

Description

Sterile ultrasound probe covers with cohesive ClearView film for fixing the ultrasound transducer head to the inside of the cover. The application of contact gel inside the sterile cover is unnecessary. Due to the non-slip positioning of the cover on the probe, an additional securing by rubber bands or adhesive strips is optional. After the application, the compound of the cover and the cohesive film is removed without leaving any residues from the probe. There is no need to clean the probe and cable of excess contact gel.

Conclusion: Saving of time and consumables by unrestricted visibility


Specification

  • Ultrasound probe cover made of LDPE-film | latex- and phthalate-free
  • Ultrasound-conductive adhesive film for positioning the probe, residue-free removal
  • Telescopic folding
  • Resistant against common disinfectants
  • Incl. adhesive tapes and rubber bands
  • Available length: 40 cm | 80 cm | 120 cm | 160 cm
  • Width: 18 cm
  • Sales unit: 200 pieces | sterile

 

Video Guide

The following Video-Tutorial does not replace the official Instruction for Use for this product. Please read the Instruction for Use carefully before using SonoGuard Plus Probe Covers in a clinical environment.

 

Downloads 

Product Catalogue Equipment Covers

Instructions for Use SonoGuard Plus

 Application

The following Application Guide does not replace the Instruction for Use for this product. Please read the Instruction for Use carefully before using SonoGuard Probe Cover.


SonoGuard Plus Application Step 1

1. Step:

The sterile person introduces the first hand into the most inner pocket of the folded cover and spreads their fingers to prevent the formation of wrinkles on the adhesive surface.


SonoGuard Plus Anleitung Schritt 2

2. Step:

The sterile person removes the protective liner from the adhesive surface with the second hand.


SonoGuard Plus Application Step 3

3. Step:

The non-sterile person places the transducer on the adhesive surface. Make sure that no wrinkles are forming. The sterile person pushes the adhesive surface onto the entire transducer from inside the cover.


SonoGuard Plus Application Step 4

4. Step:

The non-sterile person holds on to the label while the sterile person firmly holds the transducer and pulls the cover over the transducer and cable.


SonoGuard Plus Application Step 5

5. Step:

In the case of longer covers, the non-sterile person has to pull a second label to fully extend the drape over the cable.


SonoGuard Plus Application Step 6

6. Step:

To remove potential trapped air bubbles, sterile person firmly swipes over the adhesive film.


SonoGuard Plus Application Step 7

7. Step:

Attach the cover to the transducer with the adhesive strips or rubber bands provided.


8. Step (Optional):

If there is an additional adhesive strip or rubber band provided, the loose-fit cover may be tightened behind the transducer to the cable to improve handling during use.


We use cookies

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.